docs: rewrite README as a technical reference and refresh the package docs

This commit is contained in:
helix-nine committed 2026-08-16 22:41:41 -06:00
1 parent afce65a734
commit ee18089d82
3 files changed
+156 -146

No files matched your search

+147 -137
View File
@@ -1,19 +1,18 @@
<p align="center">
<img src="icon.png" alt="PPQ Private Mode Logo" width="21%" />
<img src="icon.png" alt="PPQ Private Mode Logo" width="21%">
</p>
# PPQ Private Mode on StartOS
> **Upstream docs:** <https://github.com/PayPerQ/ppq-private-mode-proxy>
>
> Everything not listed in this document should behave the same as the upstream
> PPQ Private Mode proxy. If a feature, setting, or behavior is not mentioned
> here, the upstream documentation is accurate and fully applicable.
> Everything not listed in this document should behave the same as upstream
> PPQ Private Mode. If a feature, setting, or behavior is not mentioned here,
> the upstream documentation is accurate and fully applicable — see the
> Documentation section of `instructions.md` for links.
End-to-end encrypted proxy for [PPQ.AI](https://ppq.ai) private (TEE) AI models.
Requests are encrypted on your server and only decrypted inside a
hardware-secured enclave whose code fingerprint is cryptographically attested
before any data is sent. Upstream: [PayPerQ/ppq-private-mode-proxy](https://github.com/PayPerQ/ppq-private-mode-proxy).
[PPQ Private Mode](https://github.com/PayPerQ/ppq-private-mode-proxy) is a local proxy that encrypts AI requests on your server and only lets them be decrypted inside an attested hardware enclave, so neither PPQ.AI nor the model host can read them. This package runs that proxy and points any OpenAI- or Anthropic-compatible client at it.
- **Upstream repo:** <https://github.com/PayPerQ/ppq-private-mode-proxy>
- **Wrapper repo:** <https://github.com/Start9-Community/ppq-private-mode-startos>
---
@@ -21,152 +20,151 @@ before any data is sent. Upstream: [PayPerQ/ppq-private-mode-proxy](https://gith
- [Image and Container Runtime](#image-and-container-runtime)
- [Volume and Data Layout](#volume-and-data-layout)
- [Installation and First-Run Flow](#installation-and-first-run-flow)
- [Configuration Management](#configuration-management)
- [Network Access and Interfaces](#network-access-and-interfaces)
- [Actions (StartOS UI)](#actions-startos-ui)
- [Backups and Restore](#backups-and-restore)
- [Health Checks](#health-checks)
- [File Models](#file-models)
- [Dependencies](#dependencies)
- [Network Access and Interfaces](#network-access-and-interfaces)
- [Installation and First-Run Flow](#installation-and-first-run-flow)
- [Actions](#actions)
- [Tasks](#tasks)
- [Health Checks](#health-checks)
- [Backups and Restore](#backups-and-restore)
- [Limitations and Differences](#limitations-and-differences)
- [What Is Unchanged from Upstream](#what-is-unchanged-from-upstream)
- [Contributing](#contributing)
- [Quick Reference for AI Consumers](#quick-reference-for-ai-consumers)
---
## Image and Container Runtime
The image is built from the upstream repository's own `Dockerfile` via the
`ppq-private-mode-proxy` git submodule (multi-stage `node:22-alpine` build,
runs as the unprivileged `node` user). No entrypoint modifications; the daemon
runs `node /app/dist/bin/server.js` directly.
One image, built from upstream's own Dockerfile.
Architectures: `x86_64`, `aarch64`.
| Property | Value |
| ------------- | ------------------------------------------ |
| Image | Built from the vendored upstream submodule |
| Architectures | x86_64, aarch64 |
| Command | The proxy's server entrypoint |
| Subcontainer | Purpose |
| ------------ | ---------------------------------------- |
| `proxy-sub` | The only daemon — the one to `attach` to |
**Upstream is vendored as a git submodule and built here**, rather than pulled as a published image — so the shipped bits correspond to a specific upstream commit.
One oneshot runs first, giving the data directory to the unprivileged user the image runs as.
## Volume and Data Layout
One volume, `main`, split so the container sees only what it owns:
One volume, with a deliberate split down the middle.
| Host path | Container path | Written by |
| ------------------- | ------------------- | ------------------------------------------------ |
| `proxy/config.json` | `/data/config.json` | the proxy (Status Page) **and** the SDK (action) |
| `store.json` | not mounted | the SDK only |
| Volume | Subpath | Mount Point | Purpose |
| ------ | ------- | ----------- | ----------------------------- |
| `main` | `proxy` | `/data` | Upstream's own data directory |
`proxy/` is mounted at `/data` as the proxy's `PPQ_DATA_DIR`, and `config.json`
inside it is upstream's own file — the proxy rewrites it wholesale when a key is
saved from the Status Page, so nothing of ours may live there. The Verbose
Logging setting therefore lives in `store.json`, outside the mount.
| Path | Written by | Holds |
| ------------------- | ------------------------- | -------------------------- |
| `proxy/config.json` | The proxy, and the action | The PPQ.AI API key |
| `store.json` | The action | The package's own settings |
A `chown` oneshot hands `/data` to the image's unprivileged `node` user before
the daemon starts, so the Status Page can write to it.
**Only the `proxy` subpath is mounted into the container.** The package's own settings live at the volume root, outside what the proxy can see — so the proxy neither reads them nor overwrites them when it rewrites its own file.
## Installation and First-Run Flow
## File Models
On install, an **important** (non-blocking) task prompts for a PPQ.AI API key.
There are two ways to satisfy it, and neither is required before starting:
Two models, and keeping them apart is the point.
1. Run the **Configure PPQ API Key** action.
2. Start the service and save the key on the **Status Page**.
| File | Format | Modelled | Written by |
| ------------------- | ------ | ----------------------- | ------------------------- |
| `proxy/config.json` | JSON | Yes — `FileHelper.json` | The proxy, and the action |
| `store.json` | JSON | Yes — `FileHelper.json` | The action |
The proxy runs without a key — it completes attestation, serves the Status Page,
and answers `401` to inference requests until one is set. The task is
deliberately not critical: a critical task suspends every other control, which
would leave the user unable to start the service and reach the Status Page's own
key form.
**The proxy's config file is co-owned, and its shape must stay exactly upstream's.** The proxy rewrites the whole file when a key is saved on its status page, so anything else stored there would be destroyed — which is why the verbose-logging setting lives in a separate file the container cannot see.
## Configuration Management
**The API key is not passed as an environment variable**, though upstream supports that. Leaving it out means the proxy's own key store is the single owner of the key, so a key set through the status page and a key set through the action are the same key rather than two competing sources.
The API key is the proxy's to own. StartOS does **not** pass `PPQ_API_KEY`;
instead it points `PPQ_DATA_DIR` at the mounted volume so upstream's key store
is the single source of truth, written by either the action or the Status Page
and read from the same file by both.
- `PPQ_DATA_DIR` — `/data`, enabling persistence and the Status Page's key form
- `DEBUG` — set from the action's Verbose Logging toggle, via `store.json`
- `HOST` — fixed to `0.0.0.0` (container binding)
- `PORT` — fixed to 8787
- `PPQ_API_BASE` — not set (upstream default `https://api.ppq.ai`)
The proxy loads `config.json` once at startup, so `main.ts` watches the file:
writing a key restarts the daemon, which reloads it. A key saved on the Status
Page takes effect immediately in the running proxy and then triggers that same
restart — brief, and it converges on the value just saved either way.
## Network Access and Interfaces
Two interfaces on one HTTP host, port 8787, both served by the proxy:
- **Status Page** (`ui`) — upstream's server-rendered page at `/`: attestation
state (enclave host and code fingerprint), API-key status, the private model
list, and client setup snippets.
- **OpenAI-Compatible API** (`api`) — the same origin, shown as a copyable
connection string for AI clients. Endpoints: `GET /health`,
`GET /v1/models`, `POST /v1/chat/completions` (OpenAI format),
`POST /v1/messages` (Anthropic format).
Availability on LAN/Tor is decided by the user from the interface panel.
**No endpoint is authenticated.** Upstream ships no auth on any route, so
whoever can reach the port can spend the user's PPQ.AI balance via
`/v1/chat/completions`, and — because this package sets `PPQ_DATA_DIR` — can
also replace the stored key via `POST /setup/api-key`
([upstream #23](https://github.com/PayPerQ/ppq-private-mode-proxy/issues/23)).
The billing exposure predates that endpoint and is inherent to the proxy; the
key-replacement one is enabled by our `PPQ_DATA_DIR` choice, and closes when
upstream's patch lands and this package bumps to it. `instructions.md` warns
the user to expose the interface accordingly.
## Actions (StartOS UI)
- **Configure PPQ API Key** (`configure-api-key`) — visible and enabled at any
service status. Inputs: the PPQ.AI API key (masked, validated against
upstream's `^sk-[A-Za-z0-9]{16,64}$` shape; left blank it keeps the key
already saved and is never echoed back into the form) and the Verbose Logging
toggle. No result output. Also the target of the first-run task.
## Backups and Restore
The `main` volume (i.e. `config.json`) is backed up. Restore brings back the
saved API key and settings; no other state exists. Note that backups therefore
contain the saved PPQ.AI API key (StartOS backups are encrypted with the
user's backup password).
## Health Checks
One daemon readiness check on port 8787. The upstream proxy only binds its
port after remote attestation of the enclave succeeds, so "listening" implies
the encrypted channel is verified. Until attestation completes the check
reports the proxy as not ready.
The config file is read reactively, which is what makes a key saved by the action take effect: the write restarts the daemon, and the proxy reloads the file at start.
## Dependencies
None.
**But the service is not self-contained.** Every request is forwarded to PPQ.AI's enclave, so the package needs working internet and a funded PPQ.AI account. Running this proxy locally is not running inference locally — what it buys is that the request contents are encrypted end-to-end into the enclave.
## Network Access and Interfaces
**Two interfaces on one address**, which is unusual and deliberate.
| Interface | Id | Type | Port | Description |
| --------- | ----- | ---- | ---- | --------------------------------------------------- |
| Status | `ui` | ui | 8787 | Attestation state, available models, setup snippets |
| API | `api` | api | 8787 | The OpenAI-compatible endpoint |
Both are exported from the **same binding**, because they are the same server: one is the page a person opens, the other is the URL a client is pointed at. Bound on the `main` MultiHost over HTTP and not masked.
**Neither is authenticated by StartOS**, and the status page is where the API key can be saved — so anyone who can reach the address can read the attestation state, use your key for inference, and replace it. Treat the address as a credential.
## Installation and First-Run Flow
Install seeds nothing and raises an `important` task asking for the PPQ.AI API key.
**That task is deliberately not `critical`**, and the reasoning is worth knowing: a `critical` task suspends the ordinary controls, which would leave the user unable to start the service — and the service's own status page is the other place a key can be saved. Blocking startup would block one of the two ways to complete the task.
So the proxy starts without a key. It serves its status page, performs attestation, and answers inference requests with an authentication error until a key exists.
**A key saved on the status page clears the task too.** The action clears its own task when it runs, but the status page never goes through the action — so the restart that the save triggers is where the package notices a key now exists and clears the prompt itself. Without that, StartOS would keep asking for a key the user had already set.
## Actions
One action.
### Configure PPQ API Key
Sets the API key and the verbose-logging switch.
- **What it changes:** the key in the proxy's config file, and the logging setting in the package's own store.
- **Cost:** the service restarts, since the proxy reads its config at start.
- **Repeat safety:** idempotent. **Leaving the key blank keeps the existing one** rather than clearing it, so the action can be used to toggle logging without re-entering the key.
- **The key is never echoed back into the form.** The logging toggle is pre-filled; the key is not.
- **The key's shape is checked before it is written.** Upstream's status page rejects a malformed key outright, but a bad key written straight into the config file would only surface later as a failed request — so the same check is applied here.
**Requests are billed to whichever key is set.**
## Tasks
One, and it is advisory.
| Task | Severity | Raised when | Cleared when |
| --------------------- | ----------- | ------------------------- | --------------------------------- |
| Configure PPQ API Key | `important` | An init that finds no key | The action runs, or a key appears |
`important` does not block the service from starting — see [Installation and First-Run Flow](#installation-and-first-run-flow) for why that matters here.
## Health Checks
One check, on the only daemon.
| Check | Displayed as | Method |
| ------- | ----------------- | ---------------------- |
| `proxy` | "Encrypted Proxy" | Port 8787 is listening |
**Here a port check means more than usual.** The proxy binds its port only after remote attestation of the enclave has succeeded, so a listening port is evidence that the encrypted channel was verified — not merely that a process started.
It still says nothing about the key: an unset or rejected key shows a green check and an authentication error on the request.
## Backups and Restore
The `main` volume is copied wholesale — `sdk.Backups.ofVolumes('main')`. That is the proxy's config file, holding the API key, and the package's settings.
**The backup contains the API key in recoverable form**, and requests made with it are billed to your account. There is nothing else here: no conversation history, no cache, no model data.
A restored instance comes back with the same key and works immediately, since nothing in the configuration is tied to the server it ran on.
## Limitations and Differences
1. This service is a client-side encryption proxy, not a self-hosted model
server: inference runs remotely in PPQ.AI's attested TEE enclaves, and a
funded [PPQ.AI](https://ppq.ai) API key is required (pay-per-query).
2. Saving a key on the Status Page restarts the daemon a few seconds later.
The proxy applies the key immediately; the restart is StartOS reacting to
the same file write, and is what makes the **Configure PPQ API Key** action
work at all (upstream reads `config.json` only at startup).
3. The upstream OpenClaw-plugin mode is not packaged; only the standalone
proxy runs on StartOS.
4. The bind address and port are fixed inside the container; upstream's
`HOST`/`PORT`/`PPQ_API_BASE` variables are not user-configurable.
## What Is Unchanged from Upstream
- All API endpoints, request/response formats, and streaming behavior
- The encryption and attestation flow (EHBP transport via the `tinfoil` client)
- Model catalog and per-request `Authorization: Bearer` key override
- The status page rendered at `/`, its API-key form included
## Contributing
See [AGENTS.md](AGENTS.md).
1. **Inference is not local.** Requests go to PPQ.AI's enclave; the privacy claim is about who can decrypt them, not about where they run.
2. **A funded PPQ.AI account is required**, and requests are billed to the configured key.
3. **Neither interface is authenticated**, and the status page can both use and replace the key.
4. **The status page and the API share one address**, so they cannot be exported separately.
5. **The API key cannot be cleared from the action** — leaving the field blank preserves it.
6. **The package cannot add settings to the proxy's config file**, which upstream rewrites wholesale.
7. **The only package-level setting is verbose logging.** Everything else is upstream's.
---
@@ -174,20 +172,32 @@ See [AGENTS.md](AGENTS.md).
```yaml
package_id: ppq-private-mode
architectures: [x86_64, aarch64]
image: built from ./ppq-private-mode-proxy # upstream vendored as a git submodule
architectures:
- x86_64
- aarch64
subcontainers:
- proxy-sub
volumes:
main: /data # subpath `proxy/` only; `store.json` stays host-side
ports:
main: 8787 # one host serving both interfaces
interfaces:
- ui
- api
dependencies: none
main:
proxy: /data # PPQ_DATA_DIR; store.json sits at the volume root, unmounted
file_models:
- proxy/config.json # upstream's shape exactly — the proxy rewrites it wholesale
- store.json # package-owned; kept outside the mount so the proxy can't clobber it
startos_managed_env_vars:
- PPQ_DATA_DIR
- HOST
- PORT
- DEBUG
# PPQ_API_KEY is deliberately NOT set — the proxy's key store owns the key
dependencies: [] # but requires internet and a funded PPQ.AI account
interfaces:
ui: { type: ui, port: 8787 } # status page; also where a key can be saved
api: { type: api, port: 8787 } # same binding, exported as a second interface
actions:
- configure-api-key
- configure-api-key # blank key field preserves the existing key
tasks:
- { action: configure-api-key, severity: important } # not critical, by design
health_checks:
- proxy # the port opens only after enclave attestation succeeds
```